LIGHTS

• Turn them off in unoccupied areas, (walk-in refrigerators, storage and break rooms), and take advantage of daylight from windows and skylights where possible.
• 
  
• Use timers and keep them properly set (i.e. no outside lights during the day).
• 
  
• Install occupancy sensors to shut off lights when rooms are not in use.
• 
  
• Replace incandescent bulbs with ENERGY STAR^® compact fluorescent bulbs.
• 
  
• Use LED bulbs in exit signs instead of incandescents.
• 
  
• Replace T-12 fixtures with T-8s and electronic ballasts.
• 
  
• Install dimmable ballasts and lighting controls to enable you to control light levels.
• 
  

HEATING & COOLING

• Download an Opportunities for Refrigeration Cost Savings information sheet.(PDF)
• 
  
• Make sure doors and windows have tight seals and keep them closed when running your air conditioning system.
• 
  
• Turn off exhaust hoods and lights when not needed.
• 
  
• Turn off all fans when the building is unoccupied.
• 
  
• Install ENERGY STAR programmable thermostats and locking covers to prevent tampering.
• 
  
• Consider landscaping such as trees and awning for shading devices.
• 
  
• Check equipment regularly (evaporative coolers, fans, pumps, etc.) for proper operation and maintenance needs.
• 
  

GENERAL EQUIPMENT

• Create a start-up and shut-down schedule for appliances.
• 
  
• Maintain refrigerator door seals, clean condenser and coils monthly, and defrost appropriately.
• 
  
• Install a refrigerant heat recovery system to use waste heat from walk-ins to preheat hot water.
• 
  
• Purchase energy-efficient appliances such as reach-in refrigerators and freezers.
•